Create a new Query

Descripción

final public MongoDB\Driver\Query::__construct ( array|object $filter [, array $queryOptions ] )

Constructs a new MongoDB\Driver\Query, which is an immutable value object that represents a database query. The query may then be executed with MongoDB\Driver\Manager::executeQuery().

Parámetros

filter (array|object)

El » predicado de la consulta. Un predicado vacío coincidirá con todos los documentos de una colección.

Nota: Al evaluar criterios de consulta, MongoDB compara tipos y valores según sus propias » reglas de comparación para tipos BSON, lo cual difiere de las reglas de comparación y manejo de tipos de PHP. Al encontrar un tipo BSON especial, los criterios de consulta deben utilizar la clase BSON respectiva (p.ej. usar MongoDB\BSON\ObjectID al encontrar un » ObjectID).

queryOptions

**queryOptions**
Option	Type	Description
allowDiskUse	boolean	Allows MongoDB to use temporary disk files to store data exceeding the 100 megabyte system memory limit while processing a blocking sort operation.
allowPartialResults	boolean	For queries against a sharded collection, returns partial results from the mongos if some shards are unavailable instead of throwing an error. Falls back to the deprecated "partial" option if not specified.
awaitData	boolean	Use in conjunction with the "tailable" option to block a getMore operation on the cursor temporarily if at the end of data rather than returning no data. After a timeout period, the query returns as normal.
batchSize	integer	The number of documents to return in the first batch. Defaults to 101. A batch size of 0 means that the cursor will be established, but no documents will be returned in the first batch. In versions of MongoDB before 3.2, where queries use the legacy wire protocol OP_QUERY, a batch size of 1 will close the cursor irrespective of the number of matched documents.
collation	array\|object	» Collation, o cotejamiento, permite a los usuarios especificar reglas específcas del lenguaje para comparar cadenas, tales como reglas para mayúsculas/minúsculas y marcas de acento. Cuando se especifica el cotejamiento, el cambpo "locale" es obligatorio; todos los demás campos de cotejamiento son opcionales. Para la descripción de los campos, véase la » Documentación de Collation. Si no se especifica el cotejamiento y la colección tiene un cotejamiento predeterminado, la operación usará el cotejamiento especificado por la colección. Si no se especifica el cotejamiento para la colección o para la operación, MongoDB usará la comparación binaria simple utilizada en versiones anteriores para comparar cadenas. Esta opción está disponible en MongoDB 3.4+ y resultará en una excepción durante la ejecución si se especifica para una versión más antigua del servidor.
comment	string	A comment to attach to the query to help interpret and trace query profile data. Falls back to the deprecated "$comment" modifier if not specified.
exhaust	boolean	Stream the data down full blast in multiple "more" packages, on the assumption that the client will fully read all data queried. Faster when you are pulling a lot of data and know you want to pull it all down. Note: the client is not allowed to not read all the data unless it closes the connection. This option is not supported by the find command in MongoDB 3.2+ and will force the driver to use the legacy wire protocol version (i.e. OP_QUERY).
explain	boolean	If `TRUE`, the returned MongoDB\Driver\Cursor will contain a single document that describes the process and indexes used to return the query. Falls back to the deprecated "$explain" modifier if not specified. This option is not supported by the find command in MongoDB 3.2+ and will only be respected when using the legacy wire protocol version (i.e. OP_QUERY). The » explain command should be used on MongoDB 3.0+.
hint	string\|array\|object	Index specification. Specify either the index name as a string or the index key pattern. If specified, then the query system will only consider plans using the hinted index. Falls back to the deprecated "hint" option if not specified.
limit	integer	The maximum number of documents to return. If unspecified, then defaults to no limit. A limit of 0 is equivalent to setting no limit. A negative limit is will be interpreted as a positive limit with the "singleBatch" option set to `TRUE`. This behavior is supported for backwards compatibility, but should be considered deprecated.
max	array\|object	The exclusive upper bound for a specific index. Falls back to the deprecated "$max" modifier if not specified.
maxAwaitTimeMS	integer	Positive integer denoting the time limit in milliseconds for the server to block a getMore operation if no data is available. This option should only be used in conjunction with the "tailable" and "awaitData" options.
maxScan	integer	Advertencia This option is deprecated and should not be used. Positive integer denoting the maximum number of documents or index keys to scan when executing the query. Falls back to the deprecated "$maxScan" modifier if not specified.
maxTimeMS	integer	The cumulative time limit in milliseconds for processing operations on the cursor. MongoDB aborts the operation at the earliest following interrupt point. Falls back to the deprecated "$maxTimeMS" modifier if not specified.
min	array\|object	The inclusive lower bound for a specific index. Falls back to the deprecated "$min" modifier if not specified.
modifiers	array	» Meta operators modifying the output or behavior of a query. Use of these operators is deprecated in favor of named options.
noCursorTimeout	boolean	Prevents the server from timing out idle cursors after an inactivity period (10 minutes).
oplogReplay	boolean	Internal use for replica sets. To use oplogReplay, you must include the following condition in the filter: [ 'ts' => [ '$gte' => <timestamp> ] ] Nota: This option is deprecated as of the 1.8.0 release.
projection	array\|object	The » projection specification to determine which fields to include in the returned documents. If you are using the ODM functionality to deserialise documents as their original PHP class, make sure that you include the __pclass field in the projection. This is required for the deserialization to work and without it, the driver will return (by default) a stdClass object instead.
readConcern	MongoDB\Driver\ReadConcern	A read concern to apply to the operation. By default, the read concern from the MongoDB Connection URI will be used. This option is available in MongoDB 3.2+ and will result in an exception at execution time if specified for an older server version.
returnKey	boolean	If `TRUE`, returns only the index keys in the resulting documents. Default value is `FALSE`. If `TRUE` and the find command does not use an index, the returned documents will be empty. Falls back to the deprecated "$returnKey" modifier if not specified.
showRecordId	boolean	Determines whether to return the record identifier for each document. If `TRUE`, adds a top-level "$recordId" field to the returned documents. Falls back to the deprecated "$showDiskLoc" modifier if not specified.
singleBatch	boolean	Determines whether to close the cursor after the first batch. Defaults to `FALSE`.
skip	integer	Number of documents to skip. Defaults to 0.
slaveOk	boolean	Allow query of replica set secondaries
snapshot	boolean	Advertencia This option is deprecated and should not be used. Prevents the cursor from returning a document more than once because of an intervening write operation. Falls back to the deprecated "$snapshot" modifier if not specified.
sort	array\|object	The sort specification for the ordering of the results. Falls back to the deprecated "$orderby" modifier if not specified.
tailable	boolean	Returns a tailable cursor for a capped collection.

Errores/Excepciones

Lanza una MongoDB\Driver\Exception\InvalidArgumentException en errores de análisis de argumentos.

Historial de cambios

Versión	Descripción
1.8.0	Added the "allowDiskUse" option. The "oplogReplay" option is deprecated.
1.5.0	The "maxScan" and "snapshot" options are deprecated.
1.3.0	Added the "maxAwaitTimeMS" option.
1.2.0	Added the "allowPartialResults", "collation", "comment", "hint", "max", "maxScan", "maxTimeMS", "min", "returnKey", "showRecordId", and "snapshot" options. Renamed the "partial" option to "allowPartialResults". For backwards compatibility, "partial" will still be read if "allowPartialResults" is not specified. Removed the "slaveOk" option, which is obsolete. For queries using the legacy wire protocol OP_QUERY, the driver will set the slaveOk bit as needed in accordance with the » Server Selection Specification.
1.1.0	Added the "readConcern" option.

Ejemplos

Ejemplo #1 MongoDB\Driver\Query::__construct() example


<?php
/* Select only documents authord by "bjori" with at least 100 views */
$filter = [
    'author' => 'bjori',
    'views' => [
        '$gte' => 100,
    ],
];

$options = [
    /* Only return the following fields in the matching documents */
    'projection' => [
        'title' => 1,
        'article' => 1,
    ],
    /* Return the documents in descending order of views */
    'sort' => [
        'views' => -1
    ],
];

$query = new MongoDB\Driver\Query($filter, $options);

$manager = new MongoDB\Driver\Manager('mongodb://localhost:27017');
$readPreference = new MongoDB\Driver\ReadPreference(MongoDB\Driver\ReadPreference::RP_PRIMARY);
$cursor = $manager->executeQuery('databaseName.collectionName', $query, $readPreference);

foreach($cursor as $document) {
    var_dump($document);
}

?>

Ver también

MongoDB\Driver\Manager::executeQuery() - Execute a database query
MongoDB\Driver\Cursor